Set acceleration threshold, unit is degree.
Chart 6-29
6.5.4.3 IVS Event
6.5.4.3.1 Pedestrian
When it detects pedestrian in detection zone, it will trigger alarm.
Step 1. Select Setting>Event>IVS Event>Pedestrian. See Figure 6-81.
Figure 6-81
Step 2. Set parameters.
Select lane no. of detection zone.
Select to enable snapshot.
Chart 6-30
Step 3. Click OK.
6.5.4.3.2 Parking
When detection zone has parking event, it will trigger alarm.
Step 1. Select Setting>Event>IVS Event>Parking, see Figure 6-82.
To Next Page
Loading...