User Manual of NVR2XXX(-P4-P8) Series NVR
105
Select Arming Schedule tab to set the channel’s arming schedule for the motion detection.
Choose one day of a week and up to eight time periods can be set within each day.
Note: Time periods shall not be repeated or overlapped.
Figure 8. 3 Set Arming Schedule of Motion Detection
5. Click Handling tab to set up alarm response actions of motion alarm (please refer to Chapter Setting Alarm
Response Actions).
Repeat the above steps to set up arming schedule of other days of a week. You can also use Copy button
to copy an arming schedule to other days.
6. Click the OK button to complete the motion detection settings of the channel.
To Next Page
Loading...
Need help?
General
