User Manual of NVR2XXX(-P4-P8) Series NVR
60
5.5 Manual Record
Purpose:
Follow the steps to set parameters for the manual record. The manual recording is prior to the scheduled recording.
Steps:
1. Enter the Manual settings interface.
Menu> Manual
Or press the REC button on the remote control.
Figure 5. 19 Manual Record
2. Enabling Manual Record
1) Select Record on the left bar.
2) Click the status button before camera number to change to .
3. Disable manual record.
Click the status button to change to .
Note: Green icon means that the channel is configured the record schedule. After rebooting all the
manual records enabled are canceled.
To Next Page
Loading...
Need help?
General
