User Manual of NVR2XXX(-P4-P8) Series NVR
109
8.3 Detecting Video Loss Alarm
Purpose:
Detect video loss of a channel and take alarm response action(s).
Steps:
1. Enter Video Loss interface of Camera Management and select a channel you want to detect.
Menu> Camera> Video Loss
Figure 8. 9 Video Loss Setup Interface
2. Set up handling method of video loss.
Check the checkbox of “Enable Video Loss Alarm”, and click Handling button to set up handling method of
video loss.
3. Set up arming schedule of the channel.
Select Arming Schedule tab to set the channel’s arming schedule.
Choose one day of a week and up to eight time periods can be set within each day.
Note: Time periods shall not be repeated or overlapped.
Figure 8. 10 Set Arming Schedule of Video Loss
4. Select Handling tab to set up alarm response action of video loss (please refer to Chapter Setting Alarm
Response Actions).
Repeat the above steps to set up arming schedule of other days of a week. You can also use Copy button to
copy an arming schedule to other days.
5. Click the OK button to complete the video loss settings of the channel.
To Next Page
Loading...
Need help?
General
