Dahua NVR2 Series NVR2208 User Manual

User Manual of NVR2XXX(-P4-P8) Series NVR
41
4.1 Configuring PTZ Settings
Purpose:
Follow the procedure to set the parameters for PTZ. The configuring of the PTZ parameters should be done before
you control the PTZ camera.
Steps:
1. Enter the PTZ Settings interface.
Menu >Camera> PTZ
Figure 4. 1 PTZ- General
2. Choose the camera for PTZ setting in the Camera dropdown list.
3. Enter the parameters of the PTZ camera.
Note: All the parameters should be exactly the same as the PTZ camera parameters.
Example: If the PTZ camera uses the protocol of DRAGON, you should select DRAGON in the PTZ
Protocol field.
4. Click Apply button to save the settings.

Dahua NVR2 Series NVR2208 Specifications

General

Brand	Dahua
Model	NVR2 Series NVR2208
Category	Network Hardware
Language	English