Dahua NVR2 Series NVR2208 User Manual

User Manual of NVR2XXX(-P4-P8) Series NVR
162
12.5 Restoring Default Settings
Steps:
1. Enter the Default interface.
Menu > Maintenance > Default
Figure 12. 15 Restore Factory Default
2. Click the OK button to restore the default settings.
Note: Except the network parameters (including IP address, subnet mask, gateway, MTU, default route and server
port), all other parameters of the device will be restored to factory default settings.

Dahua NVR2 Series NVR2208 Specifications

General

Brand	Dahua
Model	NVR2 Series NVR2208
Category	Network Hardware
Language	English