Dahua NVR2 Series NVR2208 User Manual

User Manual of NVR2XXX(-P4-P8) Series NVR
136
10.2 Managing Network HDD
Purpose:
You can add the allocated NAS or disk of IP SAN to NVR, and use it as network HDD.
Steps:
1. Enter the HDD Information interface.
Menu > HDD>General
2. Click the Add button to enter the Add NetHDD interface, as shown in Figure 10. 5.
Figure 10. 5 HDD Information Interface
3. Add the allocated NetHDD.
4. Select the type to NAS or IP SAN.
5. Configure the NAS or IP SAN settings.
• Add NAS disk:
1) Enter the NetHDD IP address in the text field.
2) Enter the NetHDD Directory in the text field.
3) Click the OK button to add the configured NAS disk.
Note: Up to 8 NAS disks can be added.
Figure 10. 6 Add NAS Disk

Dahua NVR2 Series NVR2208 Specifications

General

Brand	Dahua
Model	NVR2 Series NVR2208
Category	Network Hardware
Language	English