User Manual of NVR2XXX(-P4-P8) Series NVR
137
• Add IP SAN:
1) Enter the NetHDD IP address in the text field.
2) Click the Search button to the available IP SAN disks.
3) Select the IP SAN disk from the list shown below.
4) Click the OK button to add the selected IP SAN disk.
Note: Up to 1 IP SAN disk can be added.
Figure 10. 7 AddIP SAN Disk
6. After having successfully added the NAS or IP SAN disk, return to the HDD Information menu. The
added NetHDD will be displayed in the list.
Note: If the added NetHDD is uninitialized, please select it and click the Init button for initialization.
Figure 10. 8 Initialize Added NetHDD
To Next Page
Loading...
Need help?
General
