Dahua NVR5416-EI User Manual

Parameter Description
DHCP Enable the system to automatically obtain a dynamic IP address.
MAC Address Displays the MAC address of the Device.
IP Address
●
Enter the IP address and then congure the corresponding subnet
mask and default gateway.
●
After conguration, click Test to check whether there is conict in
IP address.
IP address and default gateway must be on the same network
segment.
Subnet Mask
Default Gateway
To unbind NIC, on the TCP/IP page, click . The unbinding will take eect after the
Device restarts.
3. On the TCP/IP page, congure DNS server. This step should be performed when you
enable the domain name service.
You can get DNS server address or manually enter it.
●
Automatically get DNS server address: When there is a DHCP server in the network,
you can enable DHCP, and then the Device gets a dynamic IP address.
●
Enter DNS server address: Select IP Version, and then congure the preferred DNS
server and alternate DNS server.
4. On the Default Card drop-down list, select the default NIC.
5. Click Next.
Step 3 Enable P2P, and then click Next.
Scan the QR code on the actual page to download the app. Register an account and then
you can add the Device to the app.
Before using the P2P function, make sure that the NVR has connected to the WAN.
The Status becomes Online after you successfully congure P2P.
User's Manual
126

Dahua NVR5416-EI Specifications

General

Brand	Dahua
Model	NVR5416-EI
Category	Network Hardware
Language	English