Dahua NVR5416-EI User Manual

5.13.3 Resetting Password
You can reset the password when you forget the password.
5.13.3.1 Enabling Password Reset
Enable the password reset function and congure the linked email address and security questions
that are used to reset the password.
Procedure
Step 1 Select Main Menu > ACCOUNT > Password Reset.
Step 2 Click to enable the password reset function.
This function is enabled by default.
Step 3 Enter an email address to receive the security code used to reset the password.
Step 4 Congure security questions and answers.
Step 5 (Optional) Follow the on-screen instructions to bind the Device to DMSS app.
Figure 5-266 Bind device
Step 6 Click OK.
5.13.3.2 Resetting Password on Local Page
Procedure
Step 1 Right-click the live page and then select any item on the shortcut menu.
●
If you have congured unlock pattern, the unlock pattern login window is displayed.
Click Forgot Pattern to switch to password login.
●
If you did not congure unlock pattern, the password login window is displayed.
User's Manual
387

Dahua NVR5416-EI Specifications

General

Model	NVR5416-EI
Operating System	Embedded Linux
IP Camera Input	16
Interface	HDMI, VGA
VGA Resolution	1920 × 1080
Multi-screen Display	Yes
Video Compression	H.265, H.264, MJPEG
Audio Compression	G.711, G.726
Network Protocol	HTTP, DHCP, DNS, DDNS, RTP, RTSP, PPPoE, NTP, UPnP, SMTP
Mobile Phone Access	Yes
Interoperability	ONVIF, CGI
Browser	Chrome
Record Mode	Manual, Schedule, Motion, Alarm
Backup Method	USB, Network
Playback	Yes
Ethernet	1 RJ-45 port (10/100/1000 Mbps)
USB	2x USB 2.0
RS485	1 port, for PTZ control
Power Supply	100-240V AC, 50/60Hz
Operating Conditions	-10 °C to +55 °C
Video Output	HDMI, VGA
Network Interface	1 RJ-45 port (10/100/1000 Mbps)
Operating Temperature	-10 °C to +55 °C
Operating Humidity	10% to 90%
HDMI Resolution	4K (3840x2160)