Figure 5-102 EPTZ linkage for playback
Step 3 Turn on the EPTZ linkage function, and then conîš‚gure parameters.
If a certain channel has turned on the EPTZ linkage function, the conîš‚guration will still
take eîš„ect after exiting playback. When replaying the recording of this channel again, the
EPTZ linkage eîš„ect is still displayed.
Figure 5-103 Setting the EPTZ linkage for playback
Table 5-30 Parameters description
Parameter
Description
Display Mode
Select the number of tracked channels. Full screen, 1+1, 1+3 and 1+5
modes are available, and full screen is selected by default.
Linkage Track
After Linkage Track is enabled, intelligent events will be tracked. It is
disabled by default.
User's Manual
222
To Next Page
Loading...
Need help?
General
