25
Move the cursor to DISPLAY SETUP and then click confirm button, you can go to the third submenu. Please
use the left/right button on the keyboard or in the speed dome terminal menu to set. After completed setup,
please click save button to save current setup.
PRESET TITLE: Display dome preset title or not. Please use the left/right button on the keyboard or in
the speed dome terminal menu to set. You can go to Function Setup->Preset section to set
corresponding preset value and preset title.
AZIMUTH DISP: Display dome current coordinates or not. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set
TIME DISP: Display dome system time or not. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
POSITION: Display the angel between the benchmark and then current location. Please use the
left/right button on the keyboard or in the speed dome terminal menu to set.
ZOOM DISP: Display speed dome zoom speed or not. Please use the left/right button on the keyboard
or in the speed dome terminal menu to set.
INSIDE TEMPERATURE: Display dome internal temperature or not. There are three options: ℃/F/Off.
Please use the left/right button on the keyboard or in the speed dome terminal menu to set.
OUTSIDE TEMPERATURE AND HUMIDITY: Display dome external temperature and humidity. There
are three options: ℃/F/Off. Please use the left/right button on the keyboard or in the speed dome
terminal menu to set.
IDLE TIME: The option includes close/1/2/3/4/5min. The system will exit the menu automatically once
there is no menu operation during the time you specify here. Close means always show the menu.
BACK: Go back to the previous menu.
EXIT: Log out system menu.
4.4.3 Camera Setting
Move the cursor to CAMERA SETTING and then click confirm button, you can go to the submenu.
WHITE BALANCE SETUP: Move the cursor to current option and then click confirm button, you can go
to the third menu.
EXPOSURE SETTING: Move the cursor to current option and then click confirm button, you can go to
the third menu.