Dahua SMART PSS - 5.3 Device Display&Control

97
Item
Function
Modify area
Change hot zone map name, picture and description.
Delete area
Delete corresponding hot zone.
5.2.3 Liveview E-map
After you edited the e-map, you can click View button to liveview. Buttons at the left top of the
interface can zoom in, zoom out or move e-map. Double click a camera on the e-map, you can
view video. See Figure 5-8.
Figure 5-8
5.3 Device Display&Control
The device type supports NVR6000 series product only. Here is for you to set split mode and
display channel.
Click icon , you can go to the following interface. Drag a channel on the right pane to the
window to bind.
Click the window display mode setup button at the bottom of the interface; you can see the 128-
channel of the NVR6000. In Figure 5-9, you can view the 1-split mode. You can click channel
range to select corresponding channel.