Check the box here and then input user name and password, you
can go to the Windows OS after the computer restarts.
Check the box here to enable time synchronization function and
then input synchronization time. SmartPSS can auto synchronize
time with the PC at the time you specified.
Click Sync now button to begin synchronization now.
3.3.2 File Path
File configuration interface is shown as below. See Figure 3-4.
Here you can set snapshot picture and record file default save path.
Configuration file path: It is to import or export configuration file. If you change path to D disk, you
can export current software user information to D disk. If current software has installed at the D
disk, you can import user information to current software.
Figure 3-4
3.3.3 Alarm Prompt
It is to set alarm prompt audio. The interface is shown as below. See Figure 3-5.
Please select corresponding prompt audio for the specified alarm type.
Check the box at the bottom of the interface to enable e-map function. The e-map can flash
when the corresponding alarm occurs.
To Next Page
Loading...