Dahua SMART PSS - 3.8 Video Wall Configuration

66
d) Click OK button, you can view the scheme information on the alarm setup interface. See
Figure 3-73.
Figure 3-73
3.7.2 Enable/Disable/Export Scheme
After you added a scheme, you can view the following contents for operation information.
 : Delete current scheme.
 : Disable current scheme.
 : Enable current scheme.
 : Add scheme.
 : Select one or more scheme(s) and then click this button to delete.
 : Import scheme information.
 : Export scheme informaiton.
3.8 Video Wall Configuration
This function allows you to output video to the video wall. Please follow the steps listed below.
1) Click , system goes to video wall setup interface. See Figure 3-74.