Dahua SMART PSS - 3.6.3 Record;Storage; 3.6.3.1 Schedule

48
Parameter
Note
Send EMAIL
If select this parameter, then when alarm occurs, it send Email to user.
Alarm Upload
If select this parameter, then when alarms occurs, alarm will be sent to center.
SMS
If select this parameter, then when alarm occurs, user will receive SMS.
3.6.3 Record/Storage
3.6.3.1 Schedule
Record setup has record plan and record control.
 Record plan (schedule): Record during set period.
 Record control: Select mode of record.
You can set the corresponding period to enable schedule record function. You can follow the
steps listed below to set schedule record function.
1) Click Schedule button, you can go to the following interface. See Figure 3-51.