4.2.2 Playback Local Record
Please follow the steps listed below to search the record you want and then playback.
1) In Figure 4-7, click Local button on the right pane.
2) Check a channel (or some channels) on the device list on the top right pane.
3) Select record start time and end time.
4) Click on the left bottom to search. You can see the
corresponding dialogue box if there is no record.
5) Now you click to playback window.
4.2.3 Export
There are three ways for you to select export records.
In Device record interface, select periods on the time line and then click to export
records.
In Record event interface, select record type and then click to export records.
In Local record interface, check the records first and then click to expoer records.
You can see the export interface is shown as in Figure 4-10. Select the corresponding export
path and then click OK button to export.
Figure 4-10
You can click to view exporting and exported conditoions.
4.3 Alarm Manager
If you have set an alarm scheme, you can see the corresponding alarm in the Alarm manager
interface. You can refer to chapter 3.7.1 to set an alarm scheme first.
Click icon in the basic pane, you can go to Alarm manager interface. See Figure 4-11.
To Next Page
Loading...