Dahua SMART PSS - 3.6 Signals Manager

20
Select a device in the list, and then:
 click to modify, or click to delete it.
 Click to login the device manually.
 Click to logout the device manually.
 Click button and then select save path to save current device list to .xml file.
3.6 Signals Manager
After you added a new device, you can go to the signals manager interface to set parameters.
On the main interface, click button in the Settings pane, you can go to the following
interface. See Figure 3-16.
Figure 3-16
3.6.1 General
3.6.1.1 Network
Here is for you to set network information such as TCP/IP, connection, PPPoE, DDNS, IP filter,
SMTP, Multicast, and alarm centre.
3.6.1.1.1 TCP/IP