Dahua SMART PSS - Page 55

51
Figure 3-52
3) Set record period and check the box to select record type. Click OK button, now you can see
an interface shown as in Figure 3-53.
Figure 3-53
You can view the current time period setup from the color bar.
 Green color stands for the general record.
 Yellow color stands for the motion detect record.
 Red color stands for the alarm record.
 Blue color stands for MD and alarm record.
Tips
Choose the channel you want, then click save button to copy current setup
3.6.3.1.1 Record Control
It is for you to set record control mode. See Figure 3-54.