Connect to NVD: Select one video window, click
to open 1*1, 2*2, 3*3, 4*4 layouts of windows.
Connect to M30：Click to open 1*1, 2*2, 3*3,
4*4 or M*N layouts of windows.
：Clear all video channels or layouts on screen.
：Screen on/off setup，to open/close TV wall displsy.
：Clear screen and open window.
2) Select corresponding video wall from the screen information dropdown list. You can check to
select real-time mode if necessary. Once you enable real-time mode, system automatically
output the video to the video wall after you complete the setup. Otherwise, it does not output
the video to the video wall.
3) Drag the channel on the right pane to the corresponding screen and then binding.
You can view details of binding video in Internet Explorer.
1. In IE, enterM30 or NVD device’s IP address.
2. Download web service pack.
3. After download is complete, system pops up login interface. See
Figure 5-2
4. Enter username and password, click Login to view details of bound video source.
Default username and password is admin/admin.
4) Click save as task button, you can see system pops up a dialogue box for you to input task
name.
5) Please input task name and click Save button.
6) Click Output video.
Please note:
To Next Page
Loading...