4 Overview of Navigation and Controls
Note
The figures listed in the following chapters for reference only. Refer to the actual
product for detailed information. The operations are the same.
For some functions, please left click mouse to enter the menu contents and right click
menu to go back to the previous menu. Refer to chapter 2.5 Mouse control for
detailed information.
WARNING
The rated input voltage matches the device power on-off button. Please make sure
the power wire connection is OK. Then click the power on-off button.
To protect device, please connect device to the power adapter first and then connect
the power cable.
Always use the stable current, if necessary UPS is a best alternative measure.
Please follow the steps listed below to boot up the device.
Step 1 Connect the device to the monitor and then connect a mouse.
Step 2 Connect power cable.
Step 3 Click the power button at the front or rear panel and then boot up the device.
After device booted up, the device is in multiple-channel display mode by default.
If the boot up time is in the record period, the device automatically goes to auto
record mode, the corresponding channel indicator light is on, and device is
working properly.
4.1.2 Device Initialization
If it is your first time to use the device, please set a login password of admin (system
default user).
Note
For your device safety, please keep your login password of admin well after the
initialization steps, and change the password regularly.
Steps:
Device displays device initialization interface. See Figure 4- 1.
To Next Page
Loading...
Need help?
General