Dahua XVR5108C-S2 User Manual

308
Figure 4- 18
Step 3 Click Apply or Save to complete setup.
4.1.4.3 P2P
You can add a device via the client on the cellphone or the platform.

You can use your cell phone to scan the QR code and add it to the cell phone client.

Go to the P2P management platform, via the SN from scanning the QR code, you can
access the device in the WAN. Please refer to the P2P operation manual.
Besides startup wizard and configuration wizard, from main
menu->Setting->Network->P2P, you can also go to the P2P interface. See Figure 4- 19.
Check the box to enable P2P function, and status is online. Cell phone or the platform can
add and access the device.

Dahua XVR5108C-S2 Specifications

General

Brand	Dahua
Model	XVR5108C-S2
Category	DVR
Language	English