Dahua XVR5108C-S2 - Page 395

379
Figure 4- 105
4.9.1.3.2Snapshot
Here you can set snapshot mode, picture size, quality and frequency. See Figure 4- 106.

Snapshot mode: There are two modes: regular and trigger. If you set timing mode,
you need to set snapshot frequency. If you set trigger snapshot, you need to set
snapshot activation operation.

Image size: Here you can set snapshot picture size.

Image quality: Here you can set snapshot quality. The value ranges from 1 to 6.

Interval: It is for you to set timing (schedule) snapshot interval.