Step 3 Input the user name, password, select the group it belongs to from the dropdown
list. Then you can check the corresponding rights for current user.
Note
For convenient user management, usually we recommend the general user right is lower
than the admin account.
Step 4 Click the Set button after the period, you can set valid period to use current
account. See Figure 4- 220.
Figure 4- 220
Step 5 Click Set button, you can set six periods in one day. See Figure 4- 221.
Step 6 Check the box after the period, you can enable current setup.
Note
Check the box before the week; it is to save period settings to selected week
day.
To Next Page
Loading...