Dahua XVR5108C-S2 User Manual

613

Program is not compatible. Please upgrade to the latest version.
 Brightness is 0. Please restore factory default setup.
 There is no video input signal or it is too weak.

Check privacy mask setup or your screen saver.
 DVR hardware malfunctions.
6. Real-time video color is distorted.
There are following possibilities:
 When using BNC output, NTSC and PAL setup is not correct. The real-time video
becomes black and white.
 DVR and monitor resistance is not compatible.
 Video transmission is too long or degrading is too huge.

DVR color or brightness setup is not correct.
7. Cannot search local records.
There are following possibilities:
 HDD ribbon is damaged.
 HDD is broken.

Upgraded program is not compatible.
 The recorded file has been overwritten.
 Record function has been disabled.
8. Video is distorted when searching local records.
There are following possibilities:

Video quality setup is too low.
 Program read error, bit data is too small. There is mosaic in the full screen.
Please restart the DVR to solve this problem.

HDD data ribbon error.
 HDD malfunction.
 DVR hardware malfunctions.
9. There is no audio when monitor.
There are following possibilities:

It is not a power picker.
 It is not a power acoustics.
 Audio cable is damaged.

DVR hardware malfunctions.
10. There is audio when monitor but there is no audio when system playback.
There are following possibilities:
 Setup is not correct. Please enable audio function
 Corresponding channel has no video input. Playback is not continuous when the
screen is blue.

Dahua XVR5108C-S2 Specifications

General

Brand	Dahua
Model	XVR5108C-S2
Category	DVR
Language	English