6 Technical data
Installation manual
35
Daikin Altherma ETS(X/H)(B)-D
Heat pump (indoor unit) with integrated heat accumulator
008.1448499_00 – 06/2019 – EN
6 Technical data
Part of the current technical data is available on the regional Daikin-
website (publicly accessible). The complete technical data is avail-
able via the Daikin Business Portal (authentication required).
6.1 Information on the type plate
Fig.6-1 Type plate
1 Device type
2 Empty weight
3 Total filled weight
4 Max. permissible operating pressure PMS (heating)
5 Total storage capacity
6 Max. permissible operating temperature T
max
7 Standby heat expenditure in 24 hours at 60°C (storage
tank) Q
st
8 Operating pressure of storage water pH
2
O
9 Nominal capacity of drinking water
10 Max. operating pressure PMW (plumbing)
11 Nominal voltage U
12 Protection type
13 Electrical power consumption elmax
14 Backup-heater (optional)
15 Backup heater protection class (optional)
16 Backup heater fuse (optional)
17 Output/backup heater power supply (optional)
18 Serial number (specify in the event of complaints or inquir-
ies)
19 Date of production
6.2 Tightening torque
Component Thread size Tightening
torque in Nm
Temperature sensor All Max. 10
Hydraulic line connections (wa-
ter)
1" 25 – 30
Backup heater 1.5" Max. 10
(handtight)
Tab.6-1 Tightening torques
To Next Page
Loading...
