Daikin Altherma F - Page 220

10 | Configuration
Installer reference guide
220
EPRA14~18DAV3+W1 + ETVH16SU18+23EA6V
Daikin Altherma 3 H HT F
4P644738-1 – 2021.02
c Smartphone + app The Daikin Residential Controller app needs to be
installed on the user's smartphone. See:
http://www.onlinecontroller.daikineurope.com/
Configuration
To configure the Daikin Residential Controller app, follow the in-app instructions.
While doing this, the following actions and information are needed on the user
interface:
Mode: Turn AP mode ON (=WLAN adapter active as access point) or OFF.
# Code Description
[D.1] N/A Enable AP mode:
▪ No
▪ Yes
Reboot: Reboot the WLAN cartridge.
# Code Description
[D.2] N/A Reboot the gateway:
▪ Back
▪ OK
WPS: Connect the WLAN cartridge to the router.
# Code Description
[D.3] N/A WPS:
▪ No
▪ Yes
INFORMATION
You can only use this function if it is supported by the software version of the WLAN,
and the software version of the Daikin Residential Controller app.
Remove from cloud: Remove the WLAN cartridge from the cloud.
# Code Description
[D.4] N/A Remove from cloud:
▪ No
▪ Yes
Home network connection: Read out the status of the connection to the home
network.
# Code Description
[D.5] N/A Home network connection:
▪ Disconnected from [WLAN_SSID]
▪ Connected to [WLAN_SSID]
Cloud connection: Read out the status of the connection to the cloud.