BRC1E52A7 Operation manual
4PW71265-1 – 10.2011
22
3
Cool
Set to
Cool
28°C
• Press the remote controller that has the cooling/
heating selection eligibility (or the remote controller
without the display
"
" (Changeover under control))several times
until the desired mode is selected. The display will
change to "Fan", "Dry", "Auto", "Cool", "Heat" each
time the button is pressed.
• The display "Auto" will appear for the heating/
cooling simultaneous operation system only.
At that time, the other remote controllers with no
selection right will follow suit and change the
display automatically.
Cool/Heat Selection Eligibility
• The "Cool", "Heat", "Auto" can be set for only the remote controller for which the cooling/heating
selection eligibility is set.
(The display "Auto" will appear for the heating/cooling simultaneous operation system only.)
1.
The remote controller with
the selection eligibility
Set to "Cool", "Heat",
"Dry", "Auto" mode.
Other remote controllers
(without "
"
(Changeover under
control) displayed)
(with "
"
(Changeover under
control) displayed)
• The system will go into the mode set in
the remote controller with the selection
eligibility. No other modes are
available.
• The system, however, can be switched
to fan mode or from "Cool" to "Dry".
2.
The remote controller with
the selection eligibility
Set to "Fan" mode.
Other remote controllers
(without "
"
(Changeover under
control) displayed)
(with "
"
(Changeover under
control) displayed)
• The system cannot be set to other
modes except fan mode.
Operation Method
To Next Page
Loading...
