BRC1E52A7 Operation manual
4PW71265-1 – 10.2011
54
Setting the detailed display item selection
1
Return Setting
Display
Display Mode Standard
Display Item None
• Bring up the Display settings screen. (See
page 53.)
• Press buttons to select Display Item on the
Display settings screen.
Press Menu/Enter button to display the Display
Item settings screen.
2
Return Setting
Display Item
Display
None
•
Pressing buttons displays the following.
None
Outside Air Temp
*
Some models may not display these items even if they are selected.
• Be sure to read the following notes regarding display of room
temperature and outdoor temperature.
Room Temp
.............. An estimate of the temperature near the remote
controller.
The temperature that is detected may be
affected by the location of the unit.
Outside Air Temp
.............. An estimate of the temperature near the
outdoor unit.
The temperature that is detected may be
affected by factors such as the location of the
unit (if it is in direct sunlight, for e.g.) and unit
operation during defrosting.
• After setting, press Menu/Enter button to conrm
settings and return to the basic screen.
Operation Method