2
IMPORTANT INFORMATION ...................................... 2 - 4
PRODUCT IDENTIFICATION .............................................5
OPERATING INSTRUCTIONS ............................................6
POLARIZATION and PHASING ...................................... 13
MAINTENANCE ........................................................ 14 - 15
SERVICING ............................................................... 16 - 30
SERVICING TABLE OF CONTENTS .............................. 17
AIRFLOW TABLES .................................................... 31 - 38
1 STAGE STATUS CODES ....................................... 39 - 40
1 STAGE TROUBLESHOOTING CODES ................. 41 - 42
WIRING DIAGRAM ................................................... .......43
Pride and workmanship go into every product to provide our customers with quality products. It is possible, however, that
during its lifetime a product may require service. Products should be serviced only by a qualied service technician who
is familiar with the safety procedures required in the repair and who is equipped with the proper tools, parts, testing instru-
ments and the appropriate service manual. REVIEW ALL SERVICE INFORMATION IN THE APPROPRIATE SERVICE
MANUAL BEFORE BEGINNING REPAIRS.
-
-
To Next Page
Loading...
