ESIE05-04 Disassembly and Maintenance
Part 5 – Disassembly and Maintenance 5–43
1.12.1 Removal of Suction Grille
Warning Be sure to wait 10 minutes or more after turning off all power supplies before disassembling work.
Procedure:
Step Procedure Points
1 Removing the suction grille
1 To remove the suction
grille, slide the two tabs
simultaneously and pull
the suction grille down
slowly.
Q The grille can be
installed freely in four
directions.
Q When closing, push up the
grille slowly.
2 With the suction grille
open at an angle of 45°,
lift it up to remove it.
(S2630
(S2631)
To Next Page
Loading...
