Daikin FCQ60B7V1 - Removal of Electrical Box

ESIE05-04 Disassembly and Maintenance
Part 5 – Disassembly and Maintenance 5–117
3
5
1
5
1.15.4 Removal of Electrical Box
Warning Be sure to wait 10 minutes or more after turning off all power supplies before disassembling work.
Procedure:
Step Procedure Points
Q Removing the front grille in
accordance with "Removal
of Front Grille".
1 Remove the screw on the
service cover.
2 Remove the screw on the
drip proof plate.
3 Remove the screw for the
grounding wire.
4 Remove the following
connectors.
Q Fan motor connector
Q Air swing motor
connector
5 Pull the heat exchanger
thermistor and dismantle
it.
6 Remove the fixing screw
for switch box.
7 Pull forward the switch
box holding lower part of
the box.