Daikin FDMQ-R Series User Manual

FTX-N/U, FVXS-N, FDMQ-R Series EDUS091558E
261
C: 3P379751-5D
11
Basic Operation
The air conditioner operates with the operation mode of your choice.
From the next time on, the air conditioner will operate with the same operation
mode.
To start operation
1. Press and select an operation mode�
• Each pressing of the button changes the mode setting in sequence.
AUTO DRY COOL HEAT FAN
2. Press �
• “ ” is displayed on the LCD.
• The OPERATION lamp lights green.
Control panel
Display
To stop operation
Press again�
• “ ” disappears from the LCD.
• The OPERATION lamp goes off.
To change the temperature setting
Press �
• Press to raise the temperature and press to lower the temperature.
COOL operation HEAT operation AUTO operation DRY or FAN operation
64-90°F
(18-32°C)
50-86°F
(10-30°C)
64-86°F
(18-30°C)
The temperature setting cannot be
changed.
AUTO · DRY · COOL · HEAT · FAN
Operation
NOTE
Notes on AUTO operation
• In AUTO operation, the system selects an appropriate operation mode (COOL or HEAT) based on the indoor temperature and starts the
operation.
• The system automatically reselects setting at a regular interval to bring the indoor temperature to the user-setting level.
Note on DRY operation
• Eliminates humidity while maintaining the indoor temperature as much as possible. It automatically controls temperature and air ow rate, so
manual adjustment of these functions is unavailable.
01_EN_3P379751-5D.indd 11 11/13/2018 2:17:06 PM

Daikin FDMQ-R Series Specifications

General

Brand	Daikin
Model	FDMQ-R Series
Category	Air Conditioner
Language	English