To Next Page

To Previous Page

260

FTX-N/U, FVXS-N, FDMQ-R Series EDUS091558E

C: 3P379751-5D

Read Before Operation

Turn on the circuit breaker

• After the power is turned on, the  aps of the indoor unit open and close once to set the

reference position.

To set the clock

1. Press �

“ ” is displayed on the LCD.

“

” and “ ” blink.

2. Press to set the current day of the week�

3. Press �

“ ” blinks.

4. Press to set the clock to the present time�

• Holding down or rapidly increases or decreases the displayed time.

5. Press �

•Point the remote controller at the indoor unit when pressing the buttons.

“ ” blinks.

NOTE

Fahrenheit/Celsius display change function of remote controller

• The set temperature may increase when the display is changed to Celsius from Fahrenheit, because a fraction of 0.5°C is rounded up.

• Example: A set temperature of 65°F (equivalent to 18.5°C) will be converted into 19°C.

When the display is changed to Fahrenheit again, the set temperature will be converted into 66°F (equivalent to 19°C) instead of the

original set temperature (65°F) but a set temperature of 66°F (equivalent to 19°C) will be converted into 19°C with no temperature

change.

• A reception sound will go off for the transmission of set temperature to the indoor unit at the time of setting the Fahrenheit/Celsius display

change function.

Note on setting the clock

• If the indoor unit’s internal clock is not set to the correct time, the ON/OFF TIMER and WEEKLY TIMER will not operate punctually.

01_EN_3P379751-5D.indd 10 11/13/2018 2:17:05 PM

Daikin FDMQ-R Series User Manual

Other manuals for Daikin FDMQ-R Series