BUTTONSIII
3.1 Silk Screen of Buttons
3.1 Silk screen of buttonsFig.
3.2 Instruction to Function of Buttons
No. Description Function of Button
1 Enter/Cancel
(1) Function selection and canceling;
(2) Press it for 5s to enquiry the outdoor ambient temperature.
2
(1) Running temperature setting of indoor unit, range :16 ∼ 30°C
(2) Timer setting, range:0.5-24hr
(3) Switchover between quiet/auto quiet
6
3 Fan Setting of high/middle/low/auto fan speed
4 Mode Setting of cooling/heating/fan/dry mode of indoor unit
5 Function
Switchover among the functions of air/sleep/turbo/save/E-heater/blow/
quiet
7 Timer Timer setting
8 On/off Turn on/off indoor unit
4 Mode
and
2
Memory
function
Press Mode and
for 5s under off-state of the unit to enter/cancel key
memory function (If memory is set, indoor unit will resumer original
setting state after power failue and then power recovery. If not, indoor
unit is defaulted to be off after power recovery. Memory function is
defaulted to be off before outgoing.)
2
and
6
Lock
Upon startup of the unit without malfunction or under off-state of the
unit, press
and at the same time for 5s into lock state. In this case,
any other buttons won’t respond the press. Repress
and for 5s to
quit lock state.
3.1Ta ble.
01_EN_EM09A058A.indd 801_EN_EM09A058A.indd 8 5/13/2010 11:43:13 AM5/13/2010 11:43:13 AM
To Next Page
Loading...
Need help?
General
