5.11 E-heater Setting*
E-heater: In the heating mode, E-heater is allowed to be turned on for improvement of effi ciency.
If heating mode is turned on by button operation, auxiliary electric heating function will be automati-
cally turned on.
Press Function button in heating mode into auxiliary electric heating function, E-HEATER blinking,
and press Enter/Cancel button to turn on this function. In this case, E-HEATER will be displayed,
which means E-heater is allowed to be turned on.
If auxiliary electric heating function is on, press Function button to confi rm or press Enter/Cancel
button to cancel. In this case, E-HEATER won’t be displayed, which means E-heater is prohibited to
be turned on.
The setting of this function is shown as Fig.5.11 below:
Press “Function” button
into E-Heater function
Press “Enter/Cancel” button
to turn off E-Heater function
Press “Enter/Cancel” button
to turn on E-Heater function
Press “Function” button
into E-Heater function
Auxiliary electric heating
function will be automatically
turn on under heating mode
5.11 Auxiliary Electric Heating Function SettingFig.
E-heater can not be set in cooling, dry and fan mode, E-HEATER mark won’t be displayed. The setting Note:
is shown in Fig.5.11.
01_EN_EM09A058A.indd 1801_EN_EM09A058A.indd 18 5/13/2010 11:43:23 AM5/13/2010 11:43:23 AM
To Next Page
Loading...
