12
Manual switch
Fig. 3
■
Emergency operation
Indicator light control (indoor unit)
Use this feature to turn the indicator light on or off.
• Turn indicator light on: The symbol displayed on the remote controller shows
when the indicator light has been turned on.
• Turn indicator light off: The symbol displayed on the remote controller
disappears when the indicator light has been turned off.
Emergency operation
Use the manual switch if the remote controller is
lost or broken. The unit will run in Auto mode, but
the temperature and fan speed can not be
changed.
To use the manual switch:
Open the panel and find the manual switch on the
display box.
• Turn on the unit: Press the power button to start
operation. The unit will operate in Auto mode.
The microcomputer adjusts the indoor
temperature to a comfortable level.
• Turn off the unit: Press the power button to stop
operation.
01_EN_3V007382-3F.indd 1201_EN_3V007382-3F.indd 12 5/18/2010 4:55:26 PM5/18/2010 4:55:26 PM
To Next Page
Loading...
Need help?
General
