14
■
Cleaning and maintenance
Check before use
(1) Make sure nothing blocks the air outlet and intake vents.
(2) Make sure the ground wire is properly connected.
(3) Make sure the air conditioner’s batteries are changed.
(4) Make sure the outdoor unit's installation stand is not damaged.
If it is damaged, please contact your dealer.
Maintenance after use
(1) Turn main power off.
(2) Clean the air filter and the exterior of the indoor and outdoor units.
(3) Remove all dust and debris from the outdoor unit.
(4) Paint over rusted areas on the outdoor unit to prevent the rust from spreading.
(5) Use the special shield to guard against rust and to prevent water and dust from entering the
unit.
01_EN_3V007382-3F.indd 1401_EN_3V007382-3F.indd 14 5/18/2010 4:55:27 PM5/18/2010 4:55:27 PM
To Next Page
Loading...
Need help?
General
