Heat Pump SiUS041501E
51 Remote Controller
2. Heat Pump
Reference Refer to the following pages for detail.
Note: Refer to the operation manual of applicable model for detail. You can download operation manual
from Daikin Business Portal:
Daikin Business Portal → Product Information → Operation/Installation Manual
(URL: https://global1d.daikin.com/business_portal/login/
)
FTXN-N Series ARC480A6
FTX-N Series ARC480A8
Display (LCD)
• Displays the current settings.
(In this illustration, each section is
shown with all its displays on for the
purpose of explanation.)
(R21814)
Signal transmitter
• To use the remote controller, aim the
transmitter at the indoor unit. If there is
anything blocking the signals between
the unit and the remote controller, such
as a curtain, the unit may not operate.
• The maximum transmission distance is
about 23 ft (7 m).
Receiver
OFF button
• Press this button to stop the operation.
AUTO
+1
button
• Automatically selects an appropriate
operation mode (COOL or HEAT)
based on the indoor temperature and
starts the operation.
Direct operation buttons
• Starts the COOL, DRY, HEAT or FAN
ONLY operation.
1 Automatic operation P.26
To Next Page
Loading...
