17
INTELLIGENT EYE Operation
“INTELLIGENT EYE” is useful for Energy Saving
Notes on “INTELLIGENT EYE”
Energy saving operation
• Change the temperature +2°C in cooling / +2°C in dry mode from set temperature.
• Decrease the airflow rate slightly in FAN mode only.
• If no presence detected in the room for 20 minutes.
• Application range is as follows.
• Sensor may not detect moving objects further than 7m away. (Check the application range)
• Sensor detection sensitivity changes according to indoor unit location, the speed of
passersby, temperature range, etc.
• The sensor also mistakenly detects pets, sunlight, fluttering curtains and light reflected off of
mirrors as passersby.
• INTELLIGENT EYE operation will not go on during powerful operation.
• NIGHT SET MODE will not go on during use of INTELLIGENT EYE operation.
90˚
55˚
7m
55˚
7m
Vertical angle 90˚
(Side View)
Horizontal angle 110˚
(Top View)
CAUTION
• Do not place large objects near the sensor.
Also keep heating units or humidifiers outside the sensor’s detection area. This sensor can
detect undesirable objects.
•
Do not hit or violently push the INTELLIGENT EYE sensor. This can lead to damage and malfunction.
To combine “COMFORT AIRFLOW Operation” and
“INTELLIGENT EYE Operation”
1. Press “COMFORT/SENSOR button” and select “ ” on the LCD.
• Each time the “COMFORT/SENSOR button” is pressed a different setting option is
displayed on the LCD.
2. Press “COMFORT/SENSOR button”.
• Press the button to select “Blank”.
• The air conditioner can go into operation with the COMFORT AIRFLOW and INTELLIGENT
EYE functions combined.
• The volume of air will be set to AUTO. If the upward and downward airflow direction is
selected, the COMFORT AIRFLOW operation will be canceled.
Priority is given to the function of whichever button is pressed last.
Blank
Page 21
To Next Page
Loading...
Need help?
General
