Daikin FTKM25PVM User Manual

1, 2
20
ECONO Operation
ECONO operation is a function which enables efficient
operation by limiting the maximum power consumption
value.
This function is useful for cases in which attention
should be paid to ensure a circuit breaker will not trip
when the product runs alongside other appliances.
To start ECONO operation
1. Press “ECONO/QUIET button” and
select “ ” on the LCD.
To cancel ECONO operation
2. Press “ECONO/QUIET button”.
• Press the button to select “Blank”.
• This diagram is a representation for illustrative purposes only.
• The maximum running current and power consumption of the air conditioner in ECONO
mode vary with the connecting outdoor unit.
NOTE
• ECONO Operation can only be set when the unit is running. Pressing the OFF button
causes the setting to be canceled, and the “ ” disappears from the LCD.
• ECONO operation is a function which enables efficient operation by limiting the power
consumption of the outdoor unit (operating frequency).
• ECONO operation functions in COOL and DRY modes.
• POWERFUL and ECONO operation cannot be used at the same time.
Priority is given to the function of whichever button is pressed last.
• Power consumption may not drop even if ECONO operation is used of the level of power
consumption is already low.
Running current and
power consumption
From start up until set
temperature is reached
Time
Maximum during
normal operation
Maximum during
ECONO Mode
Normal
operation
ECONO
Mode
• Each time the “ECONO/QUIET button” is pressed
a different setting option is displayed on the LCD.
• By selection “ ” from the following icons,
the air conditioner will be in ECONO operation
combined with OUTDOOR UNIT QUIET operation.
ECONO OUTDOOR UNIT
QUIET
blank
No Setting
Combination

Daikin FTKM25PVM Specifications

General

Brand	Daikin
Model	FTKM25PVM
Category	Air Conditioner
Language	English