“ ”
and day of the week disappear from the LCD.
TIMER Operation
Timer functions are useful for automatically switching
the air conditioner on or off at night or in the morning.
You can also use OFF TIMER and ON TIMER in
combination.
To use OFF TIMER operation
• Check that the clock is correct.
If not, set the clock to the present time.
1. Press “OFF button”.
is displayed.
2. Press “SELECT button” until the
time setting reaches the point you
like.
• Each pressing of either button increases or
decreases the time setting by 10 minutes.
Holding down either button changes the time
setting rapidly.
3. Press “OFF button”.
• “OFF” and setting time are displayed on
the LCD.
• The TIMER lamp lights orange.
To cancel the OFF TIMER Operation
4. Press “CANCEL button”.
• The TIMER lamp goes off.
NOTE
• When TIMER is set, the present time is not displayed.
• Once you set ON, OFF TIMER, the time setting is kept in the memory. (The memory is
canceled when remote controller batteries are replaced.)
• When operating the unit via the ON/OFF Timer, the actual length of operation may vary from
the time entered by the user. (Maximum approx. 10 minutes)
NIGHT SET MODE
When the OFF TIMER is set, the air conditioner automatically adjusts the temperature
setting (0.5°C up in COOL) to prevent excessive cooling for your pleasant sleep.
4
2
1, 3
•
•
•
“OFF” blinks.
“ ”
and day of the week disappear from the LCD.
•
•
“OFF” and setting time disappear from the LCD.
21
Page 10
To Next Page
Loading...
Need help?
General
