11
DRY · COOL · FAN Operation
The air conditioner operates with the operation mode of
your choice.
From the next time on, the air conditioner will operate
with the same operation mode.
To start operation
1. Press “MODE selector button”
and select a operation mode.
• Each pressing of the button advances the
mode setting in sequence.
: DRY
: COOL
: FAN
2. Press “ON/OFF button”.
• “ ” is displayed on the LCD.
• The OPERATION lamp lights up.
To stop operation
3. Press “ON/OFF button” again.
• “ ” disappears from the LCD.
• Then OPERATION lamp disappear.
To change the temperature setting
4. Press “TEMPERATURE adjustment button”.
edom LOOCedom NAF ro YRD
The temperature setting is not variable.
Press “ ” to raise the temperature and press
“ ” reduce the temperature.
Set to the temperature you like.
5
4
2,3
1
To Next Page
Loading...
