Outdoor Unit / RK(X)H-C, ARK(X)H-C, R(Y)N-C SiENBE04-512A
204 Removal Procedure
4. Remove the thermistor
assembly.
1
Remove the discharge
pipe thermistor.
Be careful not to lose the
discharge pipe thermistor
fixture.
Remove the discharge pipe
thermistor while opening the
thermistor fixture.
2
To remove the
thermistor (for heat
exchanger), cut off the
clamp.
The thermistor (for heat
exchanger) is fixed in
position by a clamp.
When mounting the
thermistor, fix it always at
the same position.
The clamp is a standing
part.
Step Procedure Points
Discharge-pipe thermistorThermistor fixture
(R4490)
SiENBE04-512A.book Page 204 Friday, October 5, 2007 1:49 PM
To Next Page
Loading...