19
Useful Functions
MOLD PROOF Operation
The inside of the air conditioner is dried to reduce the occurrence of mold and
odour.
[To operate automatically]
To set
Press and hold the button for 2 seconds.
• “ ” appears on the LCD.
• After DRY or COOL operation stops, the air conditioner starts MOLD PROOF operation
automatically.
• MOLD PROOF operation lamp and FLASH STREAMER AIR CLEANING operation lamp
light green.
Display
To cancel
Press and hold the button for 2 seconds
one more time.
• “ ” disappears from the LCD.
[To operate manually]
Press for about 2 seconds while the unit is
not operating.
• “ ” blinks on the LCD, and the display returns to normal after a while.
• If the air conditioner is turned off for more than 3 minutes, press
once again and
hold the button for 2 seconds to start MOLD PROOF operation.
• MOLD PROOF operation lamp lights green and FLASH STREAMER AIR CLEANING
operation lamp lights up.
Display
To Next Page
Loading...
