16
Basic Operation
English
Tips for saving energy
Keeping the temperature setting at a moderate level helps save energy.
• Recommended temperature setting for cooling: 26.0-28.0°C
Cover windows with a blind or a curtain.
• Blocking sunlight and air from outdoors increases the cooling effect.
Keep the air lters clean.
• Clogged air lters cause inefcient operation and waste energy. Clean them once in about every 2 weeks.
If you are not going to use the air conditioner for a long period, for example in spring or autumn, turn off the circuit
breaker.
• The air conditioner always consumes a small amount of electricity even while it is not operating.
You can adjust the airow rate to increase your comfort.
To adjust the airow rate setting
Press .
• Each pressing of changes the airow rate setting in sequence.
AUTO Indoor unit quiet Airflow rate 1-5 (Low to High)
• When the airow is set to “ ”, quiet operation starts and noise from the indoor unit will
become quieter.
• In the quiet operation mode, the airow rate is set to a weak level.
• If the temperature dose not reach the desired point, change the airow rate setting.
• If COOL/DRY operation is started with airow settings on “AUTO”, the indoor unit will
initially deodorise, which functions to suppress any internal odours.
As a result, the indoor unit will not emit air immediately. (Wait for about 1 minute.)
• At smaller airow rates, the cooling effect is also smaller.
Adjusting the Airow Rate