Indoor Unit Si04-402A
120 Removal Procedure
1.3 Removal of Assembly of Front Panel Mechanism
Procedure Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Step
Procedure Points
Remove the front grille.
1. Remove the assembly of
front panel mechanism.
1
The back of the front
grilles
2
Loosen the 2 screws of
the assembly (left).
3
Remove the assembly.
When reassembling, insert
the lower rack plate first.
4
Lift the shaft and pull it
out to the rightward.
Pay attention so as not to
lose the drive gear.
To Next Page
Loading...
Need help?
General
