Daikin FTXS50K2V1B - Indoor Unit Components; Indoor Unit Parts Overview; Operational Indicators and Switches

Display
5
Name of Parts
Indoor Unit
Air inlet
Front panel
Air outlet
Louvers (vertical blades)
• Thelouversareinsideoftheairoutlet.
Page13
INTELLIGENT EYE
sensor
• Itdetectsthemovementsof
peopleandautomatically
switchesbetweennormal
operationandenergysaving
operation.
Page15
Flaps (horizontal blades)
Page13
INTELLIGENT EYE lamp
(green)
Page16
Signal receiver
• Itreceivessignalsfromtheremote
controller.
• Whentheunitreceivesasignal,youwill
hearabeepsound.
Case Soundtype
Operationstart beep-beep
Settingchanged beep
Operationstop longbeep
Indoor unit ON/OFF switch
• Pressthisswitchoncetostartoperation.
Pressonceagaintostopit.
• Theoperationmodereferstothefollowingtable.
Mode Temperaturesetting Airowrate
AUTO 25°C AUTO
• Thisswitchisusefulwhentheremotecontrollerismissing.
Model name
plate
Room temperature
sensor
• Itdetectstheairtemperature
aroundtheunit.
TIMER lamp (yellow)
Page21,22
OPERATION lamp
(green)
01_EN_3P320970-1A.indd 5 12/20/2012 11:22:01 AM