Daikin FTXTA30A2V1BW - Powerful Operation; To Start;Stop Powerful Operation

5 | Operation
User reference guide
25
FTXTA30A2V1BW
Split system air conditioner
4P518786-4F – 2020.05
Display Operation
Comfort airflow
Intelligent eye
+
Comfort airflow and Intelligent eye
— Both deactivated
Note: If there are people close to the front of the indoor unit or there are too
many people, use both operations at the same time.
2 To stop operation, press until both symbols disappear from the LCD.
5.7 Powerful operation
This operation quickly maximizes the cooling/heating effect in any operation mode.
You can get the maximum capacity.
INFORMATION
Powerful operation CANNOT be used together with Econo, Comfort airflow,
Intelligent eye and Outdoor unit quiet operation. The last selected function takes
priority.
Powerful operation will NOT increase the capacity of the unit if it already operates at
maximum capacity.
5.7.1 To start/stop Powerful operation
1 Press to start.
Result: is displayed on the LCD. Powerful operation runs for 20minutes;
after that, operation returns to the previously set mode.
Mode Airflow rate
Cooling/Heating/Automatic ▪ To maximize the cooling/heating
effect, the capacity of outdoor unit is
increased.
▪ The airflow rate is fixed to the
maximum setting and CANNOT be
changed.
▪ The temperature can be set only in
Automatic mode.
Drying ▪ The temperature setting is lowered by
2.5°C.
▪ The airflow rate is slightly increased.
Fan only The airflow rate is fixed to the
maximum setting.
2 Press to stop.
Result: disappears from the LCD.