Daikin FTXTA30A2V1BW - Flash Streamer and Fireplace Logic Operation; Flash Streamer (Air Cleaning) Operation; Fireplace Logic Operation; To Start;Stop Flash Streamer and Fireplace Logic Operation

5 | Operation
User reference guide
27
FTXTA30A2V1BW
Split system air conditioner
4P518786-4F – 2020.05
5.9 Flash Streamer and Fireplace logic operation
5.9.1 Flash Streamer (air cleaning) operation
Streamer generates a high-speed electron stream with a high oxidizing power,
reducing bad odours. Together with the titanium apatite deodorizing filter and the
air filters, this function cleans the air in the room.
INFORMATION
▪ The high-speed electrons are generated and go away inside the unit to ensure
safe operation.
▪ The Streamer discharge may generate a fizzing sound.
▪ If the airflow becomes weak, the Streamer discharge may stop temporarily to
prevent ozone smell.
5.9.2 Fireplace logic operation
Use Fireplace logic operation to equally distribute the hot air from an external heat
source (e.g. fireplace) across the room.
INFORMATION
▪ If the set temperature is reached in heating mode, the operation Fireplace logic
will start automatically.
▪ During Fireplace logic operation the indoor unit fan distributes the hot air from
the external source across the room.
▪ The airflow rate depends on difference between set temperature and
temperature in the room (higher temperature difference = higher airflow rate).
5.9.3 To start/stop Flash Streamer and Fireplace logic operation
INFORMATION
Fireplace logic operation can be activated only in heating operation mode (see
"5.3.1To start/stop operation mode and to set the temperature"[420])
1 Press one or more times.
Result: The setting will change as follows.
Display Operation
Flash Streamer (air cleaning)
Fireplace logic
+
Flash Streamer and Fireplace logic
— Both deactivated
2 To stop operation, press until both symbols disappear from the LCD.